ZETTA history began back in 2009, and as soon as in 2011 it was able to offer its customers premium-class entrance doors due to launch of a new production workshop equipped with high-tech European equipment that allowed to meet the strictest quality standards.
ZETTA continues to improve its design of metal doors and develops new design collections today. Choose a door that resonates with your soul!
ZETTA is about quality control at every stage of production, thanks to which 100% reliability is not just statistics but a real fact. Professionals who approach the production of entrance doors responsibly are another factor that secures ZETTA’s success.
ZETTA doors are designed for maximum comfort of your home – no noise from outside can spoil your rest. Two compaction circuits and an environmentally-friendly mineral wool board will not let any extraneous sound in. Quiet and calm atmosphere – even if there are road works on the street.
It will always be warm at your home – even if it’s cold as Arctic and there is strongest wind outside. Two compaction circuits together with KNAUF – a high-quality and environmentally-friendly mineral wool board ¬– will allow you to forget about any drafts and dust. Thermal insulation is similar to a refrigerator – without exaggeration.
The proper geometry of the door unit ensures minimal gaps between the panel and the box; metal thickness, environmentally-friendly insulation, decorative cover, compactors – altogether, they help retain air, along with the odors.
ZETTA doors are designed for a long service life – 500,000 cycles of opening and closing, which is as long as 30 years of service. High-quality steel of ZETTA doors is not corrodible and can withstand even the most serious load – you will not have to worry about their safety.
ZETTA does not produce uniform doors: each of them has its original design, which perfectly complements the cozy interior of your home. Emphasize your personal touch: you can also order an exclusive door produced especially for you.
ZETTA knows that doors should protect – that’s why its employees constantly work to achieve the highest possible level of protection, constantly introducing more and more emerging technologies. ZETTA entrance doors are class A level of protection – modern equipment allows to ensure the maximum tight door fitting – burglars have no chances. Add an innovative square eccentric workpiece to this, which allows to easily adjust the accuracy of the ledge – the unique solution of ZETTA engineers, which turns every door into an unassailable fortress.
Attractive price
Protection from noise and odors
Heat conservation – even in winter weather
Wide range of exclusive models for every taste
High protection parameters against inbreak
Stationary protection against inbreak. These pins are installed on the end surface in the butt area. Installing 2 to 6 anti-thefts provides extra protection against attempts to cut off butts.
Intruders will not be able to enter the apartment or house, since the latches will hold the door unit in the opening.
Improved protection against inbreak. A steel box is welded to the front side of the door, protecting locks and locking mechanisms. It does not allow to drill or break out the lock, and protects it from damage due to ingress of debris and dust.
Protection against sagging. The use of such door butts ensures long-term service. Bearings evenly distribute the door weight and extend the service life of the fittings. Due to them, the door will not sag or begin to creak.
A reliable non-flammable thermal insulation and high-quality noise insulation. A mineral board with a density of 25 kg per cubic meter is used. When put close to the steel sheets of the door panel, stiffeners and the box, this material allows to achieve a high degree of protection from cold and noise.
Safety in case of the attempt of forced penetration. The square has an optimal cross-section of 12×12 mm and does not allow to “wring out” the door from the lock part. The use of the steel square improves the breaking resistance of the entrance door.
Proprietary solution for more precise adjustment and locking of the ledge and the unit. The adjustment step of 0.5 mm allows to make the ledge tighter or weaker with uneven walls. Precision of the clamp adjustment is ensured by the eccentric walls of different thicknesses.
Reliable protection against penetration and deformation. Installation of 2 or 3 vertical ribs significantly improves the resistance to pressure and blows and prevents changes in the panel geometry.
More than 150 stores already sell metal doors in 50 Russian cities. ZETTA chain is going to expand further. Beware of fakes! You can find addresses of ZETTA brand shops on our website.
We have bought a ZETTA door and have no regrets! Before that, we could hear everything from outside, smells entered the apartment, especially cigarettes from the neighbors. I cannot say we had a cheap entrance door before, but this model made us forget about noise and smells. I really like the Victorian collection design, we could choose the right color for interior decor. It fitted in the interior of the apartment right. It can be locked and opened easily, everything is just fine!